Peel Adhesion Strength Tester

Peel Adhesion Strength Tester is a device which is used for the measurement of strength which is required to peel apart two bonded materials.

The most common use of a Peel Adhesion Strength Tester is in the manufacturing, packaging and adhesive testing industries. By gradually separating the materials and measuring the force required to peel them apart, the tester applies a force perpendicular to the bonded surface.

This testing instrument helps in the determination of the quality and adhesive strength of the bond.

Defend Your Products from Corrosion

Advanced Corrosion Salt Spray Chamber for rigorous testing, ensuring durability in harsh environments

A Peel Adhesion Strength Tester test is done for the evaluation of the load applied to the separate bonded materials. Peel/seal/bond strength tester is the most appropriate and attractive way for the characterization of adhesive bonds. Peel strength tester is usually performed at the most common angle of 90 and 180.

Working procedure of peel adhesion strength tester

Here is the working process of a peel-strength tester.

At the First, the bonded materials are securely clamped onto the tester.

After it, perpendicularly a controlled force is applied to the bonded surface, which gradually peels the materials apart. After the peeling of materials, the force required to separate the materials is measured by the tester.

The force that peels the materials is known as the peel strength.

Moreover, accurate and reliable measurements are provided by the tester which allows the manufacturers to evaluate the strength of their adhesive bonds.

However, a peel-strength tester helps in ensuring the reliability of several materials.

Load Cell Capacity	20Kgf
Test Speed	300 mm/min± 5%
Accuracy .	± 1% at full load (with master load)
Least Count/Resolution	0.020 Kgf
Grip Separation	Min. 25 mm & Max. 300 mm
Display	LED (Digital) 7 segment
Memory	After perform the test max. value save in memory
Power	220V , Single phase, 50 Hz

Microprocessor based display for accurate test results
Highly accurate test results under force.
Display for Peel Adhesive strength of test specimen
Feather touch controls
Inbuilt calibration facility
Bright LED display
Strong gripping clamps to perform Peel test at 180

Know About Our Products

The Peel Adhesion Strength Tester offers precise, multi-environment testing by combining salt spray with humidity, drying, and condensation cycles. It rigorously simulates harsh conditions to assess material durability, ensuring your products withstand corrosion and deliver long-lasting performance in challenging environments.

What is peel strength testing?

It is a test which is used for the measurement of the bond strength of a material.

What is the ISO test for peel strength?

ISO is for the measurement of comparative peel properties of adhesive bonds flexible adherents by using a T-peel test.

What is the use of a Peel tester?

A peel adhesion strength tester is used for the evaluation of the seal strength of several adhesive bonds.

What is an example of a peel-strength tester?

The examples of a peel strength tester include packaging the materials, laminated films, surface coatings and backings etc.

The precision and reliability of Effective Lab India's laboratory instruments have significantly improved our research outcomes. We've seen a marked increase in efficiency and accuracy, making them indispensable to our lab

These instruments have exceeded our expectations in every aspect. The advanced features allow for comprehensive testing, and the support team has been exceptional in ensuring everything runs smoothly

Switching to Effective Lab India 's lab equipment was one of the best decisions we've made. The accuracy and durability are top-notch, and it's evident that quality is a priority in every piece of equipment

Connect with us will help you with their queries...

For accurate laboratory testing results? contact us

for high-quality testing equipment solutions.